Additional Info

• Specification data:

  Type	Displacement cm3/rev [in3/rev]	Max. speed RPM		Max. Torgue daNm [lb-in]		Max. Output kW [HP]		Max. Pressure Drop bar [PSI]		Max. Oil Flow l/min [GPM]
  		cont.	int**	cont.	int**	cont.	int**	cont.	int**	cont.	int**
  B/HR 80	80,3 [4.9]	500	600	15,7 [1390]	19,5 [1725]	10,5 [14]	15 [20.1]	140 [2030]	175 [2540]	40 [10.6]	50 [13]
  B/HR 100	99,8 [6.09]	500	600	19,8 [1750]	24 [2125]	10,5 [14]	15 [20.1]	140 [2030]	175 [2540]	50 [13]	60,6 [16]
  B/HR 125	125,7 [7.67]	475	600	25 [2210]	30 [2655]	10,5 [14]	15 [20.1]	140 [2030]	175 [2540]	60,6 [16]	75,7 [20]
  B/HR 160	159,6 [9.74]	375	470	32 [2830]	39 [3450]	10,2 [13.7]	14 [18.8]	140 [2030]	175 [2540]	60,6 [16]	75,7 [20]
  B/HR 200	199,8 [12.19]	300	375	34,4 [3045]	39 [3450]	9,4 [12.6]	14 [18.8]	125 [1810]	155 [2250]	60,6 [16]	75,7 [20]
  B/HR 250	250,1 [15.26]	240	300	40 [3540]	47 [4160]	8 [10.7]	11,5 [15.4]	110 [1595]	140 [2030]	60,6 [16]	75,7 [20]
  B/HR 315	315,7 [19.26]	190	240	43,5 [3850]	51 [4515]	6,5 [8.7]	9 [12.1]	100 [1450]	125 [1810]	60,6 [16]	75,7 [20]
  B/HR 400	397 [24.23]	150	191	48 [4250]	55 [4870]	6,1 [8.2]	8,2 [11]	90 [1305]	105 [1520]	60,6 [16]	75,7 [20]

  ** Intermitten operation: the permissible values may occur for max. 10% of every minute.

• Brake's specification data:

  Static Torque of Brake,	daNm [lb-in]	55 [4868]
  Min. Brake Release Pressure***,	bar [PSI]	13 [190]
  Max. Opening Presure,	bar [PSI]	200 [2900]

  *** Motor-brakes must always have a drain line. The brake release pressure is the difference between the pressure in the brake release line and the pressure in the drain line.

   

• General:

  Pressure fluid		Mineral based- HLP(DIN 51524) or HM(ISO 6743/4)
  Temperature range,	°C [°F]	-40÷140 [-40÷284]
  Optimal Viscosity range,	mm2/s [SUS]	20÷75 [98÷347]
  Filtration		ISO code 20/16 (Min. recommended fluid filtration of 25 micron )